sheet roller bending machine

sheet roller bending machine for truck tanks vessel pipes HIGHEST QUALITY

sheet roller bending machine

 It is a hydraulic 3-roller rolling machine. It is used at room temperature and with this machine you can finish all the processes including pre-bending ends of a plate, rolling a plate round and setting it round at a time without a turning back after feeding the containers with carbon steel or low alloy steel.  The upper-roller can move vertically and horizontally.   Pre-bending is done with asymmetrical upper roller and the lower rollers through the horizontal movement of the upper roller.   

Spheronization is done through the movement of the two lower rollers which are driven by the motor and the reducer.

Because the standard height of the lower rollers is fixed, it is easy to feed and operate.                                               

There is a detailed electrical schematic diagram with each machine, and  the electrical alignment is carried out in strict accordance with the drawings. The number at both ends of each connection integrity is clear, and the same number of lines to connect is not only marked on the line terminal board, but also in the electrical wiring diagram and schematic diagram accordingly.  

Model	Preesure onthe upper roller(Tons	Max.Plate thickness		Plate width(mm)	Diameter of upper roller(mm)	Diameterof lower roller(mm)	Central distance(mm)	Motor(kw)
		End bending(mm)	Central(mm)					Driving	Hydralic	Shift
											W11S-15X200	75	12	15	2000	255	150	245	7.5	4	1.1
W11S-14X2500	75	10	14	2500	270	150	245	7.5	4	1.1
W11S-13X3000	75	9	13	3000	290	150	245	7.5	4	1.1
W11S-17X2500	100	13	17	2500	300	165	270	15	5.5	1.5
W11S-15X3000	100	11	15	3000	325	165	270	15	5.5	1.5
W11S-20X2500	130	16	20	2500	330	180	300	15	5.5	2.2
W11S-18X3000	130	14	18	3000	350	180	300	15	5.5	2.2
W11S-22X2500	160	18	22	2500	360	200	330	18.5	7.5	2.2
W11S-20X3000	160	16	20	3000	375	200	330	18.5	7.5	2.2
W11S-18x3500	160	14	18	3500	390	200	330	18.5	7.5	2.2
W11S-24x2500	190	20	24	2500	380	220	360	22	7.5	4
W11S-22X3000	190	19	22	3000	400	220	360	22	7.5	4
W11S-19X3500	190	16	19	3500	415	220	360	22	7.5	4
W11S-29X2500	230	25	29	2500	410	235	380	30	11	4
W11S-27X3000	230	22	27	3000	425	235	380	30	11	4
W11S-25X3500	230	21	25	3500	440	235	380	30	11	4
W11S-33X2500	270	28	33	2500	430	250	400	30	11	4
W11S-30X3000	270	25	30	3000	450	250	400	30	11	4
W11S-28X3500	270	23	28	3500	470	250	400	30	11	4
W11S-25X4000	270	20	25	4000	490	250	400	30	11	4
W11S-36X2500	320	30	36	2500	460	260	420	37	15	5.5
W11S-32X3000	320	28	32	3000	480	260	420	37	15	5.5
W11S-28X3500	320	25	28	3500	500	260	420	37	15	5.5
W11S-26X4000	320	22	26	4000	520	260	420	37	15	5.5
W11S-39X2500	380	35	39	2500	500	275	460	45	22	5.5
W11S-35X3000	380	32	35	3000	500	275	460	45	22	5.5
W11S-32X3500	380	28	32	3500	530	275	460	45	22	5.5
W11S-30X4000	380	25	30	4000	550	275	460	45	22	5.5
W11S-43X2500	430	40	43	2500	520	290	500	55	22	7.5
W11S-38X3000	430	35	38	3000	540	290	500	55	22	7.5
W11S-36X3500	430	30	36	3500	560	290	500	55	22	7.5
W11S-32X4000	430	28	32	4000	580	290	500	55	22	7.5
W11STNC-15X2000W11STNC-32X4000W11S-T&BNC-15X2000W11ST&BNC-32X4000

sheet roller bending machine